Mammoet coordinated the arrival and off load of Sasol’s two largest vessels, the wash tower and reactor
The reactor and wash tower were lowered and secured on deck barges prepared with SPMTs.
The reactor and wash tower were lowered and secured on deck barges prepared with SPMTs.
Rosharon, USA - In mid-June, Mammoet successfully coordinated the arrival and off load of Sasol’s two largest vessels, the wash tower and reactor, scheduled for the Ethane Cracker and Derivatives Project in Louisiana. The reactor, the heaviest vessel weighing 3.044 million pounds, and the wash tower, the tallest vessel at 320 feet, were lowered and secured on deck barges prepared with Self Propelled Modular Transporters (SPMTs). Hopper barges were attached to the deck barge transporting the wash tower so that tug boats could assist guiding the vessel, which is extended an additional 30 feet on each end, through a railroad bridge on the 3 mile route.
The reactor and wash tower were lowered and secured on deck barges prepared with SPMTs.
Once each vessel arrived at the Westlake dock, they were rolled off of the barge on the SPMTs. They will be staged there until March 2017 wherein the vessels will be transported to the project site and installed with Mammoet’s MSG-80, 3600 ton capacity ring crane.
After arrival at the Westlake dock, the reactor and wash tower were rolled off of the barge on the SPMTs.
After arrival at the Westlake dock, the reactor and wash tower were rolled off of the barge on the SPMTs.
The new ethane cracker will have an impressive annual production capacity of 1.5 million tons of ethylene, feeding six chemical manufacturing plants. The facility is expected to be commissioned in 2018.